Kitchen Ventilation
Makeup Air Planning for Commercial Kitchens
Plan replacement air, hood capture and kitchen pressure before finalising a restaurant or cloud-kitchen exhaust design.
An exhaust hood removes air from the kitchen as it captures heat, grease and cooking fumes. Replacement air needs a planned path back into the space. Settle that path when choosing the hood, duct route and air-conditioning layout, especially in leased Hyderabad restaurant spaces with limited space for outdoor-air intakes.
Share the appliance layout with the ventilation designer
Provide the equipment schedule, hood positions, cooking line and likely operating periods. Mark adjacent dining areas, doors and supply diffusers. Ask the designer to consider where fumes could escape the canopy when appliances, staff doors and nearby supply outlets are in normal use.
Coordinate exhaust and replacement air together
Review how much air the system removes, where replacement air enters and how air transfers between rooms. Air supplied too forcefully near a hood can disturb capture. The designer should also check comfort near the cookline and the effect on adjoining rooms and combustion appliances, where present.
- Confirm the intake and exhaust discharge locations with the landlord and design team.
- Allow space for filters, access doors and maintenance around the ventilation equipment.
- Resolve any approvals for shafts, roof access or building alterations before ordering equipment.
Include a demonstration in the handover
Ask for measured exhaust and supply airflow and a hood capture check under the agreed operating conditions. Review what happens when doors open or other building air systems change mode. Keep the settings and test records with the kitchen team so later changes can be checked against the design intent.
Technical references
Discuss your HVAC project
Share the floor plan, project stage and AC requirement for a site-specific assessment in Hyderabad. Final installation details should follow the selected equipment and approved project design.